COMPLETE MODULE; SOFT START CONTROL UNIT, SOFT START CONTROLLER, 25 A
A very practical and smart module that enables a soft start for single-phase devices
Also suitable for starting up amplifiers (couldn’t be easier)
Easy installation
Robust construction
Suitable for both industrial and DIY applications
APPLICATIONS
The unit is suitable for most resistive and inductive loads within voltage and power limitation, such as
heat lamps, fans, pumps and other ac motor loads.
An amplifier or other device with a toroidal transformer gives a strong starting current (inrush current) when you switch on the power and normally you compensate for this with slow fuses, but with this module the course can be smoothly reduced.
This mains-powered soft-start current module allows you to adjust the ramp-up time between 1 and 60 seconds. The unit also has a 10-50% column which allows a variable point to be set for the starting voltage required on some units. The units can have soft-start loads of up to 25 A (when mounted on a suitable heatsink)
– Mains powered
– Adjustable ramp-up of 1-40 s
– 10-50% column, allows to set a variable point of voltage ramp-up
– Suitable for loads of up to 25 A
– Built-in damping network
– Function for high inrush current
– Semiconductor reliability
– 5 kV insulation voltage
– TRIAC-limited current 26 A rms
– The unit’s rated current 15 A
– RoHS, CE